FAQ
A complete disposal technology of mixed plastic waste without the inclusion of chlorine and terephthalic acid development and promotion.
The team of engineers from Ikhlyas company has developed, conducted multiple tests within 14 year period, and patented the technology of the complete recycling of mixed plastic waste without any environmental impact.
Who is the target consumer, what is the sales model?
– existing solid waste management operators;
– waste processing and sorting lines manufacturers;
– other types of waste processing and disposal equipment manufacturers;
– energy-intensive industrial enterprises;
– agricultural chemistry importers;
– waste management funds;
– large companies that want to reduce their carbon footprint and reach zero emissions for the entire production chain;
– any investor who wants to benefit humanity and take part in eliminating the global problem of plastic waste.
- sorting by polymer types;
- combined and multilayered nature of polymers;
- disposable plastic products;
- thermodynamical non-compatibility of polymers;
- reduction of recycling product toxic effect;
- relatively high level of complexity and low profitability of some recycling methods.
The research results show that only 100% recycling of plastic wastes can reduce
their accumulation rate which is currently growing very fast. Unclaimed polymer waste that does not contain chlorine is used as raw materialsand. This is 74% of the total amount of hard-to-use plastic waste. those. The most common and useless plastic waste is suitable for disposal, which is most harmful to the environment and is not suitable for recycling.
Ikhlyas seeks partners to adapt the complete plastic waste disposal technology all over the world in order to solve the global problem of plastic waste before it reaches the stage of disaster.
- Ikhlyas engineers team has developed and carried out numerous tests over 14 years.
- The technology for complete recycling of mixed plastic waste without negative impact to the environment is patented.
- The project enters the international market.
- More powerful modifications have been developed during the regular operation of the equipment for more than 5 years.
The project includes a preparation equipment for plastic waste crushing, flotation, drying and transportation of raw materials to reactors.
It is enough to sign a contract for the disposal of sorted waste or place the unit in a suitable area. For example: solid waste landfills, near waste sorting lines, in ports, near industrial facilities and other areas where there is plastic waste or convenient logistics.
All plastic packaging, containers, bags and other disposable polymer products contain in the cost price the recycling fee paid at the time of import or production. The Tariffs and Prices Committee sets the disposal fee. The disposal company receives a recycling fee.
The planned production and start-up period of the equipment is up to 9 months.
Сomplete disposal of plastic waste technology development and promotion, contrary to the opinion of scientists who still believe that it is impossible to separate a long chain of polymer atoms.
The team has experience in the study, analysis and optimization of existing technologies for the plastic waste thermal destruction and gradual testing in pilot equipment units of various sizes and capacities until a successful result is obtained.
Ikhlyas engineers team has developed and carried out numerous tests over 14 years and patented the technology of complete mixed plastic waste disposal without negative impact to the environment. The developed “zero residue” technology allows to obtain 6 useful processed products:
- gasoline additives of combined action;
- diesel additive of combined action;
- petrolatum, (a mixture of low-melting and hard-melting paraffins);
- multi-consistency gas;
- carbon residue.
The technology allows to obtain 1 liter of useful products and gas from every kilogram of plastic waste.
The existing disposal equipment has been operating during 5 years. The developers are improving the efficiency of technology using the obtained processed products.
The founders are people with experience of:
- technologically advanced industrial solutions and products creation;
- complex technical equipment assembly and maintenance;
- a business in various fields founding and developing;
- corporate training creation and online projects development;
- international negotiations conducting;
- corporate training creation;
- cooperation with outsourcing specialists.
- The key equipment units will be manufactured exclusively by the Ikhlyas team specialists.
- Some units can be manufactured by outsourced contractors, depending on the agreement with the investor and the volume of IKHTECH units in the investment project.
Labor protection standards require the mandatory presence of at least 2 people in a shift, and one of them may be a senior engineer. One employee is enough to control the automated process in fact. The shift time is regulated by the current legislation of the country where the IKHTECH unit will be located.
IKHLYAS has developed a safe way to completely dispose of plastic waste. The technology is based on the thermal destruction method. Useful and environmentally friendly products that are ready for use are obtained at the output without environmental pollution.
Mixed plastic waste without chlorine and terephthalic acid makes up to 74% of the total hard-to-recycle plastic waste. Ikhlyas technology is designed to dispose these groups of plastic waste without additional sorting. This means that the most common and useless plastic waste, which causes the most harm to the environment is not suitable for recycling and can be disposed only by using Ikhlas technology and equipment.
- Some companies also declare that they have the technology for producing fuel from polymers and talk about recycling plastic waste. Ikhlyas delivers straight-run fuel without additional heating and distillation as a result of plastic disosal process.
- Other companies’ technologies produce fluids which can burn but are made up of long chains of hydrocarbons. These fluids release many toxic compounds, including harmful formaldehyde, when they burn. They are very dangerous due to their volatility and high water solubility. IKHTECH Unit’s emission protocols indicate full compliance with environmental regulations. All documents can be viewed here.
- Ikhlyas is a cost-effective technology.
Refineries heat liquids, obtained after primary processing to high temperatures, to process them into useful fractions (gasoline and diesel). This is unprofitable because refining essentially requires a fully-fledged oil refinery.
The Ikhlyas technology and IKHTECH equipment allow you to receive finished processed products immediately or reduce the costs of adjacent production facilities. - 100% Dosposal of plastic waste
Some companies declare that they achieve a plastic waste recycling rate of 30% to 60% of the total amount of plastic waste accepted for recycling.
Ikhlyas is focused on complete disposal (100%) of plastic waste, and this goal has already been achieved! - The IKHTECH Unit can work autonomously without external energy sources and associated costs.
Ikhlyas technology was successfully commercialized in 2013 and is ready to scale in 159 countries around the world.
A working industrial equipment unit for the complete disposal of mixed plastic waste without harm to the environment, with the receipt of 5 useful ready to use output products:
- combined action gasoline additive;
- combined action diesel additive;
- petrolatum, (a mixture of low-melting and hard-melting paraffins;
- multi-consistency gas;
- carbon residue.
The technology was developed with the aim of complete disposal of plastic waste without harm to the environment and the goal has been achieved.
The material balance has been preserved. Each kilogram of plastic waste turns into a liquid state and gas by thermal destruction without oxygen and combustion. There are no harmful emissions, and the escaping vapors do not exceed 90 degrees Celsius, which fulfills the conditions of the Paris Climate Agreement. All indicators of the harmful substances level do not exceed the minimum permissible content of harmful substances environmental standards. The data is confirmed by the measurement protocols.
The technology is patented and the international PCT application confirms the uniqueness and readiness to go through the national registration phase and obtaining a patent in 159 countries of the World. The national phase of patents registration in priority countries is already underway, the list of countries is available on the page.
The technology is protected by the physical laws. An explosion will occur if someone try to open protected equipment unit components. All measures have been followed and appropriate warnings have been installed on these elements For the people safety&. The conditions are spelled out in the investment agreement and technical documentation.
The technology is patented and the international PCT application confirms the uniqueness and readiness to go through the national registration phase and obtaining a patent in 159 countries of the World. The national phase of patents registration in priority countries is already underway, the list of countries is available on the page.
You probably know that all countries of the world have already faced the issue related to the plastic waste. According to the world statistics as of 2018, almost 380 Mio tons of plastic materials are produced every year. Approximately 6,3 billion tons of plastic materials were produced from 1950 to 2018, of which 9% were recycled and 12% were incinerated. https://en.wikipedia.org/wiki/Plastic_pollution
The remaining 79% have been accumulated at landfill sites, waste recycling plants and in the environment in the form of uncontrolled waste.
If the plastic production volume doesn’t change, then by 2050 the Earth will already have 12 billion tons of plastic waste.
The major issues related to polymer waste disposal:
- sorting by polymer types;
- combined and multilayered nature of polymers;
- disposable plastic products;
- thermodynamical non-compatibility of polymers;
- reduction of recycling product toxic effect;
- relatively high level of complexity and low profitability of some recycling
methods.
The research results show that only 100% recycling of plastic wastes can reduce
their accumulation rate which is currently growing very fast.
Ikhlyas technology was successfully commercialized in 2013 and is ready to scale in 159 countries around the world.
There are no analogues of Ikhlyas technology, which will be able to completely dispose of mixed plastic waste without harm to the environment and return investments up to 2 years.
- Some companies also declare that they have the technology for producing fuel from polymers and talk about recycling plastic waste.
Ikhlyas delivers straight-run fuel without additional heating and distillation as a result of plastic disosal process. - Other companies’ technologies produce fluids which can burn but are made up of long chains of hydrocarbons. These fluids release many toxic compounds, including harmful formaldehyde, when they burn. They are very dangerous due to their volatility and high water solubility.IKHTECH Unit’s emission protocols indicate full compliance with environmental regulations. All documents can be viewed here.
- Ikhlyas is a cost-effective technology.
Refineries heat liquids, obtained after primary processing to high temperatures, to process them into useful fractions (gasoline and diesel). This is unprofitable because refining essentially requires a fully-fledged oil refinery.
The Ikhlyas technology and IKHTECH equipment allow you to receive finished processed products immediately or reduce the costs of adjacent production facilities. - 100% Dosposal of plastic waste
Some companies declare that they achieve a plastic waste recycling rate of 30% to 60% of the total amount of plastic waste accepted for recycling.
Ikhlyas is focused on complete disposal (100%) of plastic waste, and this goal has already been achieved! - The IKHTECH Unit can work autonomously without external energy sources and associated costs.
There are no analogues of Ikhlyas technology, which will be able to completely dispose of mixed plastic waste without harm to the environment and return investments up to 2 years.
There are currently no analogues of Ikhlyas technology. Other developers have failed to achieve a complete disposal zero balance result and require external energy sources and high operating costs.
Scientists argue that it is impossible to separate long polymer chains, but the Ikhlyas industrial unit has been successfully disposing of plastic waste without harm to the environment since 2013.
There were attempts to copy, but they only lost time and money without a successful result.
The technology is patented and the international PCT application confirms the uniqueness and readiness to go through the national registration phase and obtaining a patent in 159 countries of the World. The national phase of patents registration in priority countries is already underway, the list of countries is available on the page.
The technology is protected by the physical laws. An explosion will occur if someone try to open protected equipment unit components. All measures have been followed and appropriate warnings have been installed on these elements For the people safety&. The conditions are spelled out in the investment agreement and technical documentation.
A Russian patent was registered and the national phase of patent registration is underway in: 30 countries of Europe, America, United Arab Emirates, India, Canada, China and Ukraine.
See the full list of countries and current status on the page.
There are no analogues of Ikhlyas technology, which will be able to completely dispose of mixed plastic waste without harm to the environment and return investments up to 2 years.
- Some companies also declare that they have the technology for producing fuel from polymers and talk about recycling plastic waste.
Ikhlyas delivers straight-run fuel without additional heating and distillation as a result of plastic disosal process. - Other companies’ technologies produce fluids which can burn but are made up of long chains of hydrocarbons. These fluids release many toxic compounds, including harmful formaldehyde, when they burn. They are very dangerous due to their volatility and high water solubility.
IKHTECH Unit’s emission protocols indicate full compliance with environmental regulations. All documents can be viewed here. - Ikhlyas is a cost-effective technology.
Refineries heat liquids, obtained after primary processing to high temperatures, to process them into useful fractions (gasoline and diesel). This is unprofitable because refining essentially requires a fully-fledged oil refinery.
The Ikhlyas technology and IKHTECH equipment allow you to receive finished processed products immediately or reduce the costs of adjacent production facilities. - 100% Dosposal of plastic waste
Some companies declare that they achieve a plastic waste recycling rate of 30% to 60% of the total amount of plastic waste accepted for recycling.
Ikhlyas is focused on complete disposal (100%) of plastic waste, and this goal has already been achieved! - The IKHTECH Unit can work autonomously without external energy sources and associated costs.
IKHLYAS has developed a safe method for the complete disposal of polymer waste, based on the method of thermal destruction, with obtaining useful, ready-to-use environmentally friendly products during 1 heating process, without environmental pollution.
Ikhlya’s technology is capable for mixed plastic waste disposal that does not contain chlorine and terephthalic acid, which is 74% to 90% of the total hard-to-use plastic waste amount. The most popular and useless plastic waste which is most harmful to the environment is not suitable for classical recycling and is suitable for Ikhlyas technology disposal process.
Ikhlyas technology can help to solve the global environmental issue of plastic waste and transform plastic waste into useful products or energy without harming the environment.
There are images of the unit – here.
Unit details – here.
Unit IKHTECH 5:
- 5 tonees Per day,
- area – 16×10 m.
- Height 9-9.5 m.
- Quarters for material preporation Facilities. Area: 45×12 m. Height, – 7 m.
- Temperature from +5 up to +40 degrees.
- The initial water volume is 15 cubic meters. The circulating water volume is 9 cubic meters.
Installation IKHTECH 10:
- 10t. Per day,
- area – 20×15 m.
- Height 9-9.5 m.
- Quarters for material preporation Facilities. Area: 45×12 m. Height, – 7 m.
- Temperature from +5 up to +40 degrees.
- The initial water volume is 15 cubic meters. The circulating water volume is 9 cubic meters.
Installation IKHTECH 30:
- 30t. Per day,
- area – 25×25 m.
- Height 9-9.5 m.
- Quarters for material preporation Facilities. Area: 45×24 m. Height, – 7 m.
- Temperature from +5 up to +40 degrees.
- The initial water volume is 15 cubic meters. The circulating water volume is 9 cubic meters.
Input voltage: 380 Volts, 50 Hz.
A concrete site and a lightweight structure without a foundation are enough to accommodate the IKHTECH unit. This makes it easier to negotiate documents to get started. It is possible to place the unit within the boundaries of a settlement, it is enough to maintain a distance of 500 meters to residential buildings. The object corresponds to the 4th hazard class, therefore, the project coordination with the architecture and urban planning does not cause difficulties.
Suitable plastic waste, which coincides with international waste classes: 2, 4, 5, 7 and forms a volume of 74% to 90% of the total plastic waste volume.
What are the sources of the main raw materials?
FMCG companies sell consumer goods in polumer packaging as usuall. Ikhlyas technology allows you to dispose almost all types of plastic waste, with a specific gravity of less than 1:
- “Residual Waste” after complete sorting line process;
- agricultural chemistry containers;
- building materials containers;
- various types of packaging films;
- medical protective equipment;
- agricultural growing plants plastic waste;
Daily household waste examples:
- candy wrapper;
- pasta packaging;
- chocolate bars packaging;
- plastic disposable bags;
- cocktails tubes;
- disposable tableware;
- disposable plastic food container;
- ear sticks;
- medical syringes containers;
- disposable medical masks;
- shoe covers and dressing gowns;
- toilet brushes;
- plastic buckets;
- basins;
- toys;
- big bags;
- polypropylene bags;
- products made of polypropylene fabric;
- chemical plant protection products containers;
- cling film;
- polymer production waste;
- toothbrushes;
- Scotch;
- ship ropes.
- sausages wrap and many other hard-to-use polymer waste…
This is a single use plastic items which thrown away into the trash bin immediately.
Annual maintenance costs range from 0.04% to 0.01% of the profit amount earned per year.
The cost of warranty service includes 1 replacement of the catalyst side bar in each reactor during the year and 1 filter cleaning process. 3 years warranty subject to the rules of using the equipment.
Software monitoring helps control the process and prevent problems.
It is planned to operate the equipment in a continuous operation mode for 6 days a week, 24 hours a day. 1 day a week is scheduled for a technological break to clean the equipment. IKHTECH plants are capable of processing the following volume in this operating mode:
- IKHTECH 5 — 1560 tons.
- IKHTECH 10 — 3120 tons.
- IKHTECH 30 — 9360 tons.
312 business days are obtained during the year. The reactor cleaning speed depends on the employees efficiency, so the technological break time can be shortened and the operating time of the units can be increased.
1. PEHD or HDPE
High density polyethylene, low pressure polyethylene
Production of bottles, flasks, semi-rigid packaging.
2. LDPE or PELD
Low density polyethylene,
high pressure polyethylene
Production of tarpaulins, garbage bags, bags, films and flexible containers.
3. PP
Polypropylene
It is used in the automotive industry (equipment, bumpers), in the manufacture of toys, as well as in the food industry, mainly in the manufacture of packaging.
Polypropylene pipes for water supply are widespread.
4. OTHER or O
Combination of different types of plastic to improve its properties, such as composite or multilayer packaging. Used to make solid transparent products.
Annual maintenance costs range from 0.04% to 0.01% of the annual profit received.
1 annual replacement of the catalyst side-bar in each reactor and cleaning of the filter are included in the cost of warranty service. Subject to the rules for operating the equipment, 1 annual warranty replacement will be sufficient. The warranty for manufactured equipment assemblies is 3 years.
Work processes are computerized and all data is recorded and monitored on the server to prevent malfunctions and breakdowns of working units.
If violations of the rules for equipment operating are recorded and a failure of the working unit occurs, it is possible to replace the failed units for an additional fee.
Percentage of service cost to the amount of annual profit received:
- IKHTECH-5 — 0.04%
- IKHTECH-10 — 0.02%
- IKHTECH-30 — 0.01%
Training, instructions preparation, drawing up standards and regulations are included in the investment budget for the project. Expenses calculation per 1 ton of the received processed product:
- IKHTECH-5 — $ 40
- IKHTECH-10 — $ 20
- IKHTECH-30 — $ 13
Watch the video of plastic waste disposal process. Factory tour and detailed process story.
Paraffin burning is recognized as the cleanest burning in the world. The process involves multiconsistent gas of its own production.
View documents with off-gas measurements, product quality analyzes, emissions and SanPiN.
Compliance with international environmental standards and even the Paris Convention on the Temperature of Vapor Escaping. No emissions of sulfur dioxide into the atmosphere after the thermal destruction of plastic waste were found. This is confirmed by the results of the measurement protocol, which indicates the absence of sulfur in the fuel obtained after processing. Prooved by documents.
1 litter of liquid products are obtained from each 1 kilogram of suitable plastic waste prepared and loaded into the reactor, subject to the operating regulations of the equipment: gasoline fraction (10%), diesel fraction (50%), petrolatum (40%). The preparation line will not let the wrong type of raw material into the reactor, and software monitoring controls the process to get a successful result.
The diesel fraction corresponds to the useful properties of a classic summer diesel engine, does not contain sulfur and is ready for use in any automobile engines and for ship engines. No need in additional distillation.
Ikhlyas diesel fraction does not contain sulfur and impurities of heavy metals. Good lubricating properties, engines run noticeably quieter.
The technology is based on the thermal destruction method. Plastic waste goes from solid to liquid without burning in a vacuum. Compliance with international environmental standards and even the Paris Convention on the Temperature of Vapor Escaping.
Ikhlyas technology was developed for the disposal of mixed plastic waste without chlorine and terephthalic cystol. These are the international types of plastic waste:
- Type 2, HDPE.
- 4 type, LDPE.
- 5 type, PP.
- 7 type, others.
All these groups can be loaded into the reactor at the same time without additional sorting.
15 year old, low value plastic that is retrieved from a landfill suitable for disposal using Ikhlyas technology.
The water is filtered and recycled back to the process after the plastic waste flotation. Filters are handed over to the solid waste landfill after repeated use. There is no impact on groundwater because water does not enter the ground. Own production filters made of the carbon residue obtained as a result of the plastic waste disposal process are already undergoing laboratory testing.
The population of the Earth is 7 836 525 000 people.
Plastic waste production calculation per 1 person is 0.048490881 Tons.
7,060,000,000 tons of plastic waste has already accumulated in landfills and in the oceans. About 380,000,000 tons of plastic are produced annually. It is necessary to manufacture and launch 36,538 IKHTECH 30 units with a perfomance of 30 tons per day to stop the annual plastic wqste flow, and the same number of IKHTECH 30 units must operate for 23 years to dispose of the plastic waste that has already accumulated. There remains one unknown variable to complete a task: how many people, companies, organizations are ready to take action now to solve a global problem as soon as possible?
The target market is huge and there is no competition yet.
On the way to decision-makers, there are many intermediate follow-ups and interceptors who do not understand the importance of the issue or simply do not transmit or distort information to the target person.
10-15% of the world’s waste amount is hard-to-recycle plastic waste, which is now left without its intended use even after the most efficient sorting. The problem of plastic waste remains relevant and unresolved in every country in the world. The technology is patented and the international PCT application confirms the uniqueness and recommends Ikhlyas technology and equipment for industrial application in 159 countries of the World.
- As of 2018, about 380 million tons of plastic were produced worldwide during the year. About 6.3 billion tons of plastic were produced from 1950 to 2018. About 9% was recycled, and 12% was burned, of the total.
- Plastics produced by 2018: 6,300,000,000 tons.
- Plastic is produced annually: 380 million tons.
- Growth rates.
- The growth in global demand for consumer goods leads to a directly proportional increase in the volume of plastic waste, despite the launch of various programs aimed at polyethylene recycling.
If the volume of waste was at the level of 150 million tons in 2004, then by 2019 this figure was doubled and already exceeds 380 million tons, this is a direct threat to the global ecosystem.
The technology is protected by a patent and the laws of physics. The process is controlled by a computerized system, the developer becomes a service partner and oversees the project. Work processes are computerized, all data is recorded and monitored on the server in order to prevent failures and breakdown of working units.
The technology is patented and the international PCT application has confirmed the uniqueness and recommends the technology and equipment for industrial use in 159 countries of the World.
It is necessary to spend at least 5 years on research activities and numerous experiments to create such a project and then prove the uniqueness, and this will already be difficult, because Ikhlyas technology has reached zero residue after plastic waste disposal process, without harm to the environment.
The software is stored on its own servers. Protected elements are marked with warning signs indicating the danger of explosion when attempting to open the element. Protection is based on the laws of physics.
It is much more profitable to invest in a joint project and get a return on investment up to 2 years.
Разработка защищена патентом, процесс управляется с помощью компьютеризированной системы, разработчик становится сервисным обслуживающим партнёром и курирует проект. Рабочие процессы компьютеризированы, все данные регистрируются и контролируются на сервере, чтобы предотвращать сбои и выход из строя рабочих агрегатов.
Технология запатентована и международная заявка PCT готова к прохождению национальной фазы и получения патента в 159 странах Мира.
Для создания подобного проекта необходимо потратить не менее 5 лет на научно-исследовательскую деятельность и многочисленные опыты и затем доказать уникальность, а это уже будет сложно, потому-что технология Ikhlyas достигла нулевого остатка после утилизации пластиковых отходов, без вреда для окружающей среды.
ПО хранится на собственных серверах.
The goal of the investment project is to dispose of unclaimed plastic waste without harm to the environment. The state is interested in preserving the environment in accordance with the Paris Agreement and is already replenishing the budget with funds received from the recycling fee for packaging products. A payment for the disposal of plastic waste is formed from these funds. The investment project is a highly profitable environmentally friendly business with a payback period of up to 2 years of investment and the ability to use the output products in the production of more narrow-profile products to increase profitability. The way to monetize products will depend on the geographic, political and territorial location of the project, the existing infrastructure and the goals of the investor. The demand for all processed products is quite high and the scope of application is wide. The distribution channel is determined at the design stage of the project.
This project solves the following problems:
- Complete polymer waste disposal.
- Plastic waste to energy.
- Reducing the costs of the existing infrastructure with the help of the output products.
Profit calculation per 1 ton of plastic waste disposal – from $ 500 with a strategy of reducing infrastructure costs or converting to energy.
The profit will be from $ 700 per 1 ton of plastic waste disposed, taking into account the receipt of government payments for the plastic waste disposal, according to the established tariff.
The goal of the investment project is to dispose of unclaimed plastic waste without harm to the environment. The state is interested in preserving the environment in accordance with the Paris Agreement and is already replenishing the budget with funds received from the recycling fee for packaging products. A payment for the disposal of plastic waste is formed from these funds. The investment project is a highly profitable environmentally friendly business with a payback period of up to 2 years of investment and the ability to use the output products in the production of more narrow-profile products to increase profitability. The way to monetize products will depend on the geographic, political and territorial location of the project, the existing infrastructure and the goals of the investor. The demand for all processed products is quite high and the scope of application is wide. The distribution channel is determined at the design stage of the project.
This project solves the following problems:
- Complete polymer waste disposal.
- Plastic waste to energy.
- Reducing the costs of the existing infrastructure with the help of the output products.
Profit calculation per 1 ton of plastic waste disposal — from $ 500 with a strategy of reducing infrastructure costs or converting to energy.
The profit will be from $ 700 per 1 ton of plastic waste disposed, taking into account the receipt of government payments for the plastic waste disposal, according to the established tariff.
- Own funds.
- Co-founder contributions.
- Investments.
The minimum project investment amount is from $ 1,475,000 with a return on investment period of up to 2 years, taking into account the time of manufacture and launch of the equipment.
Each investor chooses the optimal investment amount for him. The technology makes it possible to master the performance of the equipment to any actual volume. The higher the investment amount, the faster the investment return period. The maximum investment is determined by the potential accumulation and occurrence of plastic waste on the facility territory placement.
The goal of the investment project is to dispose of unclaimed plastic waste without harm to the environment. The state is interested in preserving the environment in accordance with the Paris Agreement and is already replenishing the budget with funds received from the recycling fee for packaging products. A payment for the disposal of plastic waste is formed from these funds. The investment project is a highly profitable environmentally friendly business with a payback period of up to 2 years of investment and the ability to use the output products in the production of more narrow-profile products to increase profitability. The way to monetize products will depend on the geographic, political and territorial location of the project, the existing infrastructure and the goals of the investor. The demand for all processed products is quite high and the scope of application is wide. The distribution channel is determined at the design stage of the project.
This project solves the following problems:
- Complete polymer waste disposal.
- Plastic waste to energy.
- Reducing the costs of the existing infrastructure with the help of the output products.
Profit calculation per 1 ton of plastic waste disposal – from $ 500 with a strategy of reducing infrastructure costs or converting to energy.
The profit will be from $ 700 per 1 ton of plastic waste disposed, taking into account the receipt of government payments for the plastic waste disposal, according to the established tariff.